How do you assemble an indoor LED screen
Led show installation: out of doors led show place is large, the layout of its steel structure need to consider the inspiration, wind load, importance, water resistant, dustproof, ambient temperature, lightning protection and plenty of different factors. The steel shape have to be placed in the distribution cabinet, aircon, axial waft lovers, lighting fixtures and other auxiliary gadget, but also have bridleway, ladder and different preservation facilities. The whole out of doors shape shall observe the protection grade under ip65. 2.1 mounting not unusual mounting: it’s miles suitable for unmarried-container show display screen with the total weight of the display frame much less than 50kg, which can be directly held on the burden-bearing wall with out the need to reserve upkeep area. The front upkeep design of the show frame is adopted, and the show display can be lifted from the bottom throughout maintenance. The schematic diagram is as follows: it’s far appropriate for trendy outdoor display. Considering the problem in keeping the show, a metallic shape is used to assist the screen body and the wall, and a maintenance area of 800mm is reserved. The gap is equipped with maintenance centers which includes bridleway and ladder, and auxiliary gadgets together with strength distribution cabinet, air conditioner, axial waft fan and lights are established. 2.2 column set up column installation is suitable for the installation of the led display display within the open area, and the out of doors display is installed at the column. The column is divided into single column and double column. Similarly to the display screen shape, concrete or metal column is likewise had to be made, in particular thinking about the geological situation of the foundation. The diagram is as follows: 2.Three. The inlaid shape is suitable for the show screen initiatives which have been covered inside the planning and layout of the constructing. The installation area of the show screen is reserved in advance throughout the construction of the civil creation project. In the real set up, the steel shape of the display display screen is simplest needed to be made and the show screen is embedded within the building wall, with sufficient upkeep space left at the returned. Bridge loading shape is adopted inside the floor concrete build by way of laying bricks or stones a sufficient to guide the whole led display wall wall, construction steel shape set up display screen on the wall, metallic structure reserved 800 mm area for renovation, related system and renovation facilities vicinity independent electric switches, calculation about extra energy first, find out approximately the modern, set aside instances as allowance for wiring;
Make several lengthy screws on the wall and attach it (take note of go away warmness dissipation holes).
Installation steps:
- Hoist the not unusual mounting bracket
- Seat becoming
indoor LED screenset up:
Out of doors led show region is large, the layout of its steel shape must recollect the foundation, wind load, magnitude, waterproof, dustproof, ambient temperature, lightning safety and lots of different factors. The metallic structure need to be positioned within the distribution cabinet, air con, axial glide fanatics, lights and different auxiliary device, however also have bridleway, ladder and other maintenance centers. The entire outdoor display structure shall follow the protection grade below ip65.
2.1 mount
Regular mounting: it’s miles appropriate for single-container show screen with the total weight of the indoor LED screen frame less than 50kg, which may be at once held on the load-bearing wall with out leaving any protection space. The indoor LED screen container adopts the front renovation design, and the show screen can be lifted from the bottom during renovation. The schematic diagram is as follows:
Frame mounting: it’s far suitable for fashionable out of indoor LED screen. Thinking about the problem in keeping the show display, a metallic shape is used to assist the screen frame and the wall, and a maintenance space of 800mm is reserved. The gap is ready with renovation facilities along with bridleway and ladder, and auxiliary equipment which includes strength distribution cabinet, air conditioner, axial drift fan and lighting are hooked up. indoor LED screen set up mode
1) set up (wall hooked up) forindoor LED screen under 10 square meters. Wall necessities are stable wall or putting concrete beams. Hollow brick or simple partition are not appropriate for this set up approach.
2) the body is suitable for the indoor LED screen of greater than 10 rectangular meters, and easy to keep. Other specific requirements are similar to wall mount.
Three) hoisting: appropriate for show screens below 10 rectangular meters. This set up technique must have a suitable region for installation, inclusive of a beam or lintel above. And the display screen body typically desires to add again cowl.
Four) seat set up: movable seat set up: refers back to the seat frame one after the other processed. Positioned on the floor and removable. Constant seat installation: refers back to the constant seat frame is connected with the floor or the wall. - Out of indoor LED screen installation technique.
1) column
2) the mosaic
Three) the rooftop-indoor LED screen
The overall installation technique is to restore the screw at the wall, in the fixed frame, the screen established within the body, join the power line, line, mild up debugging, it’s far adequate. Huashun bowenindoor LED screen photoelectric advertising and marketing department specializing in big-scale out of doors advertising and marketing, optimus prime, steel structure, sculpture, blister, bronze signs, manual device and all kinds of mild container advertising commercial enterprise; shrunk numerous led lighting fixtures tasks, constructing lights, sand desk manufacturing initiatives-indoor LED screen
